| |
|
UCP2
SL2
NAP2
UCPX
UCP3
|
|
UKP2
UKPX
UKP3
|
|
(Normal Duty)
(Normal Duty)
(Normal Duty)
(Medium Duty)
(Heavy Duty)
|
|
| |
|
|
This is the most representative unit and is universally used in all types of transmission devices.
UCP Type and SL Type are fixed at the shaft in a simple and reliable manner by means of the set screws
with hexagonal holes prepared in the inner ring. UKP Type is mounted at the shaft with the adapter. It
is suitably applied as the intermediate bearing of the long shaft or when the shaft precision is low and
shaft diameter is uneven. NAP type is fixed at the shaft by use of the eccentric locking collar and is set
completely at the shaft due to the self locking action.
|
| |
|
|
UCPE 2 (Normal Duty)
This unit is used under the high temperature. Besides the automatic center alignment, the sliding between
the inner diameter face of the housing and the outer diamter face of the intermediate ring can adjust the elongation
by the heat expansion of the shaft to the thrust direction.
|
| |
|
|
UCPH 2 (Normal Duty)
UCPH2 type pillow block pedestal design with increased center height. It is especially applied to a fan or
blower. The unit is comparable to UCP2 type under normal shock load. Life is prolonged and maintainance costs are lowered.
|
| |
|
|
UCPA 2 (Normal Duty)
UCPA2 type pillow block is very convenient since they can be used even if operating space is restricted. It can be
fitted with bolts from the underneath of the base.
|
| |
|
|
ALP2 (SA2 fitted) (Light Duty)
BLP2 (SB2 fitted) (Light Duty)
ALP2 and BLP2 type pillow blocks are used as light-duty units, in which SA2 type and SB2 type bearings respectively
are fitted. ALP2 type is fixed at the shaft with eccentric locking collar and BLP2 type is fixed with setscrews.
|
