A PREMIUM TACKY ADHESIVE MUTI-PURPOSE EP WATERPROOF GREASE DESIGNED TO "STAY IN PLACE" IN AUTOMOTIVE, INDUSTRIAL, HEAVY DUTY FLEET, FARM EQUIPMENT AND MARINE APPLICATIONS.

Product Description:
MOREY'S SUPER RED PREMIUM EP-MP2 WATERPROOF GREASE is a premium, heavy duty, EP multi-purpose grease fortified with polymers, tackiness, additives, high viscosity base oils, and rust and oxidation inhibitors. MOREY'S advanced formulation provides grease unsurpassed in adhesive and film strength quality. MOREY'S SUPER RED PREMIUM GREASE is designed to "Stay in Place" under the most servere operating conditions to resist water wash-out and wear from shock loading. The advanced formulation of this premium product provides a grease unsurpassed in adhesive and film strength quality under the worst operating conditions of water-dirt-mud.

Typical Uses: The adhesive and water resistance qualities of this grease make it an ideal chassis lubricant for "off road" trucks, construction, agricultural, logging, mining equipment. Also recommended for rock crushers, oil field equipment, off shore drilling and marine deck equipment. Recommended for industrial plain bearings operating under shock loads or wet and dirty conditions. NOT RECOMMENDED FOR SMALL ANTI-FRICTION BEARINGS OPERATING OVER 5000RPM. Note: Tackiness additives used to make grease "stay in place" make this grease harder to pump and may require the use of a heavy follower plate in air operated grease pumps. NOT RECOMMENDED FOR CENTRALIZED DISPENSING SYSTEMS COMMONLY FOUND IN INDUSTRIAL PLANTS.

Features: Adhesive-tacky grease that stays in place. Unexcelled water wash-out resistance. Excellent protection against shock loading wear. Rust and corrosion inhibited to protect metal surfaces. Extreme pressure protection. Meets 60 pounds Timken OK Load Test. Dyed distinctive red colour to better detect defective bearing seals Grease "stays in place" Less frequent regreasing required. Oxidation inhibitors permit operations up to 300ºF for extended periods.

Available in: 450gm. pot, 14oz. carton, 20kg. pail, 180kg. drum

Typical Inspections

GRADE, NLGI PENETRATION @ 77ºF (ASTM WORKED) DROPPING POINT, ºF BASE OIL VISCOSITY     cSt @ 40 ºC     cSt @ 100 ºC TIMKEN OK LOAD SOAP TYPE COLOUR APPEARANCE VALUES HERE ARE TYPICAL AND MAY VARY

2 280 380 353 17.8 60 pound minimum Lithium 12-hydroxy Stearate Red Smooth & Tacky

	Back to Morey's Grease and Lubricants